A10VSO71/DFR1/31R-PPA12N00 A10VSO71DFR/31R-PPA12KB3 A10VSO71DFR1/31R-PPA12N00 A10VSO71DFR1/31R-VPA12N00 A10VSO71DFR1/32R-VP22U99S2184 German Rexroth

A10VSO71/DFR1/31R-PPA12N00 A10VSO71DFR/31R-PPA12KB3 A10VSO71DFR1/31R-PPA12N00 A10VSO71DFR1/31R-VPA12N00 A10VSO71DFR1/32R-VP22U99S2184 German Rexroth controlled piston pump

FAQ；

Product Basics

• What is the application range of the A10VSO series?
  • The A10VSO series is a variable - displacement axial - piston pump with a swash - plate design, mainly used for hydrostatic transmissions in open - loop circuits, and is widely applied in industrial hydraulic systems.
• What are the main specifications of the A10VSO series?
  • The A10VSO series has specifications including A10VSO10, A10VSO18, A10VSO28, A10VSO45, A10VSO71, A10VSO100, and A10VSO140. Its rated pressure can reach up to 280 bar, and the peak pressure can reach 350 bar.

Installation and Operation

• What should be paid attention to during the installation of the A10VSO series pump?
  • The pump and the motor should be installed concentrically to avoid increasing the radial load on the pump. The installation bolts should be tightened to prevent looseness, which may lead to vibration and noise.
  • For self - priming pumps, the oil level in the hydraulic tank should not be lower than the lower limit of the oil level gauge to ensure sufficient oil supply.
• How to adjust the flow of the A10VSO series pump?
  • The flow of the A10VSO series pump is proportional to the drive speed and displacement. By adjusting the position of the swash plate, that is, adjusting the variable piston to change the swash - plate angle, the output flow of the pump can be smoothly adjusted.

A10VSO71/DFR1/31R-PPA12N00 A10VSO71DFR/31R-PPA12KB3 A10VSO71DFR1/31R-PPA12N00 A10VSO71DFR1/31R-VPA12N00 A10VSO71DFR1/32R-VP22U99S2184 German Rexroth Images